Hi there I'm running version 3.17 firmware on the SSII Hub 10's here, and the securityUserTable is only visible if you use a read-write community string. Peter. ----- Original Message ----- From: Nerijus Krukauskas <nkrukauskasat_private> To: <BUGTRAQat_private> Sent: 30 August 1999 14:43 Subject: One more 3Com SNMP vulnerability > Hi, > > It seems that 3Com does not pay much atention how its SNMP is > implemented. In 3Com SuperStack II hubs MIB there's an OID: > .1.3.6.1.4.1.43.10.4.2. Its name decodes to > .iso.org.dod.internet.private.enterprises.a3Com.generic.security.securityUse rTable. > What You need to know that's read-only community and this OID will give you > entire table of communities (read-write and read-only). > If somebody knows how to contact 3Com with such reports forward this info > to them. Half an hour exploring 3Com web site i found no e-mail's (not even > supportat_private). Amazing... > > -- > Nerijus Krukauskas Bank of Lithuania > Division head IT department, Networking division > Tel. +370-2-680731 Zirmunu 151 > nkrukauskasat_private 2012 Vilnius, Lithuania > >
This archive was generated by hypermail 2b30 : Fri Apr 13 2001 - 15:01:08 PDT