Hello. Im receiving a lot of emails asking for community, information available for this community, etc. you can test your routers with tools like snmpwalk (*Nix). you can run for test snmpwalk router ILMI |more ILMI (Interim Local Management Interface (ATM concept)) is a undocumented snmp community in cisco, olicom/crosscom router (this two vulnerabilities have been reported at February 2001). In Cisco routers this is a RW community .This afects Netbuilder II routers too, but it is a Read Only community. If someone find other model that will be vulnerable please tell me. i attach the command's result pask@hades $ snmpwalk router ILMI system.sysDescr.0 = SW/NBII-CP,9.3 system.sysObjectID.0 = OID: enterprises.43.1.4.12 system.sysUpTime.0 = Timeticks: (2777530) 7:42:55.30 system.sysContact.0 = system.sysName.0 = system.sysLocation.0 = system.sysServices.0 = 76 interfaces.ifNumber.0 = 123 interfaces.ifTable.ifEntry.ifIndex.1 = 1 interfaces.ifTable.ifEntry.ifIndex.2 = 2 interfaces.ifTable.ifEntry.ifIndex.3 = 3 interfaces.ifTable.ifEntry.ifIndex.4 = 4 interfaces.ifTable.ifEntry.ifIndex.5 = 5 interfaces.ifTable.ifEntry.ifIndex.6 = 6 interfaces.ifTable.ifEntry.ifIndex.7 = 7 interfaces.ifTable.ifEntry.ifIndex.8 = 8 interfaces.ifTable.ifEntry.ifIndex.9 = 9 interfaces.ifTable.ifEntry.ifIndex.10 = 10 Regards.
This archive was generated by hypermail 2b30 : Mon May 28 2001 - 10:49:03 PDT