Symbol Technologies Default WEP KEYS Vulnerability Systems: Symbol Technologies PDT 8100 Severity: Medium Category: Default password storage and access Classification: Installation problem BugTraq-ID: TBA CVE-ID: CAN-2003-0934 SymbolTech-ID: 620646 Local Exploit: yes Vendor URL: http://www.symbol.com Author: Michael S. Scheidell, SECNAP Network Security Notifications: AutomedRX Nov 6, 2003 Symbol Technologies, Nov 7, 2003 Cert, Nov 7, 2003 Released: November 10, 2003 Discussion: http://www.symbol.com/products/mobile_computers/mobile_pdt8100.html Tap, Type, or Scan-Maximum Versatility in a Portable Data Terminal The PDT 8100 Series from Symbol Technologies bridges the gap between pure pen-based and key-based mobile data collection solutions. The first Pocket PC device available with multiple keyboard options, the PDT 8100 is a versatile, large-screen handheld that delivers the functionality of Pocket PC with the convenience of tactile, key-based data entry. Problem: During installation, if the default WiFI keys and shared secret are not changed: A) they can be retrieved by end user B) used by hackers to gain unauthorized access to wireless network Symbol Access PDT 8100 hides existing WEP keys so that users cannot view them IF AND ONLY IF YOU CHANGE THE DEFAULTS. This is not a design flaw but rather a feature in the PDT 8100 that is used ONLY during initial setup to facilitate connection to client's Wireless gateways. Where the vulnerability exists is if during installation, these keys are not changed. If not changed, the PDT 8100 will reveal them to any user in plain text by taping on the wireless icon on lower right hand of 8100 and scrolling to the 'encryption tab'. A stolen PDT 8100 or copied keys can allow an insider the ability to totally compromise the WiFi network. Unchanged factory default keys are published and should not be used past initial testing or on a live network. Tested on model 8146-T2B940US The Common Vulnerabilities and Exposures (CVE) project has assigned the name CAN-2003-0934 to this issue. This is a candidate for inclusion in the CVE list (http://cve.mitre.org), which standardizes names for security problems. Vendor Response: November 10, 2003: Vendor was extremely helpful and confirmed what the default keys were, and that changing the default keys would hide them from user. Symbol Technologies continues to work with Wifi standards and security groups to improve both the user experience and the security of their products and has upgraded and updated both their software and firmware to keep up with the latest security requirements. Symbol Technologies recommends (in their installation manuals and guides) that all default passwords and keys be changed during installation. Exploit: A user just needs to clone the Wifi keys, shared secret, MAX address and SSID to be able to have unauthorized access to the client's network. Solution: The installer or client needs to change both the shared secret and the Wifi Keys. Also see Seven Security Problems of 802.11 Wireless at: http://www.oreillynet.com/pub/a/wireless/2002/05/24/wlan.html Credit: Problem found by Michael Scheidell, SECNAP Network Security vulnerability research team, with assistance by John Hughes, Symbol Technologies http://www.symbol.com and Syed Jafri, AutoMedRX, Inc. http://www.automedrx.com Original copy of this report can be found here http://www.secnap.net/security/031106.html Copyright: Above Copyright(c) 2003, SECNAP Network Security, LLC. World rights reserved. This security report can be copied and redistributed electronically provided it is not edited and is quoted in its entirety without written consent of SECNAP Network Security, LLC. Additional information or permission may be obtained by contacting SECNAP Network Security at 561-368-9561
This archive was generated by hypermail 2b30 : Mon Nov 10 2003 - 13:53:48 PST