Hello, During an analysis of some HP Jetdirect cards I discovered a security issue that could lead to full access to a networked printer. It looks like the vulnerability described in http://www.securityfocus.com/bid/5331, but the OID is different and you can only obtain one specific password. It is also different from the password vulnerability described in http://www.securityfocus.com/bid/3132 It applies to the following situation: - Any operating system -HP Jetdirect cards JetDirect 300X, (J3263A), JetDirect EX Plus (J2591A), JetDirect 400N (J2552A, J2552B), JetDirect 600N (J3110A, J3111A, J3113A) and older. -The Jetdirect card is being managed from HP Web Jetadmin. -A Web Jetadmin "device password" had been set on the JetDirect card. (This password must be set from Web Jetadmin and has nothing to do with the Telnet password or the SNMP Set community name) In the above situation the Web Jetadmin device password is readable as plain ASCII tekst from the JetDirect card using SNMP. How to check your printers for this vulnerability: Use an SNMP toolkit to read the following OID from your printer: .iso.org.dod.internet.private.enterprises.hp.nm.system.net-peripheral.net- printer.generalDeviceStatus.gdPasswords (In numerical format: .1.3.6.1.4.1.11.2.3.9.1.1.13.0) An example on a Windows machine, using SNMPUTIL from the Windows Resource kit: C:\>snmputil get 131.155.120.118 public .1.3.6.1.4.1.11.2.3.9.1.1.13.0 Variable = .iso.org.dod.internet.private.enterprises.11.2.3.9.1.1.13.0 Value = String <0x41><0x42><0x43><0x44><0x55><0x56><0x3d><0x31><0x30><0x38><0 x3b><0x00><0x00><0x00><0x00> ..etc... The resulting string reads in ASCII: ABCDEF=108; The Web Jetadmin device password is the word before the '=' sign, in this case: ABCDEF How to protect your printer: 1. Keep the Web Jetadmin device password EMPTY (don't do this on newer cards than the ones mentioned above) 2. Define a 'Set community name' instead Additional means of protection (does not address the SNMP vulnerability): 3. Define a telnet password (do not keep it empty) 4. Create an 'allow list' from the Telnet console to restrict access from defined IP-addresses Sven Pechler University of Technology Eindhoven Faculty of Technology Management
This archive was generated by hypermail 2b30 : Thu Mar 06 2003 - 12:06:53 PST