On Tue, 8 Oct 2002, Solar Designer wrote: Dear Solar ! I have OWl Release 1.0. Thanks for include section about Lilo in setup. And i have small problems. IAfter configured interfaces eth0 and eth1 (make ip address on every int) i'm ping from this hosts those IP adress. When i'm ping other ip address in local networks i see that network unreacheble. But i know that NIC absolute normal and cable - good ;-) I see /etc/sysctl.conf and see that firewall was disable. > Date: Tue, 8 Oct 2002 06:41:19 +0400 > From: Solar Designer <solar@private> > Reply-To: owl-users@private > To: owl-users@private > Subject: Re: Scanlogd message with smbclient? > > On Mon, Oct 07, 2002 at 03:05:37PM +0200, Fa. TimiCom wrote: > > now I just need to know how the message is sent automatically when an alert is > > stored in alert.log . > > Currently, the syslogd that is packaged for Owl is not able to run > programs. That is one of the features I'd add once we (hopefully) > move to a more advanced syslogd (the most likely choice appears to be > forking Darren Reed's nsyslogd). > > So, yes, you'd have to use log file monitoring tools or have syslogd > write into a pipe, -- which is supported, see syslog.conf(5), -- and > have your script read messages off the pipe and e-mail them. > > -- Michael Vlasov , MICHAEL-RIPN, MVY162-RIPE http://www.matrix.ru/michael, ICQ#12612617
This archive was generated by hypermail 2.1.3 : Sun Jan 15 2006 - 13:43:17 PST