Randy, Andreas, and all - I've changed the message Subject, but did not otherwise break the thread this time - since discussion had already proceeded in this thread. In general, whenever you post something on a different topic, please be sure to set the proper message Subject - and if you're also starting a new thread of discussion, please post your message anew rather than by hitting "reply" to another message on the list. This affects threading in web-based mailing list archives. Thanks. On Wed, Feb 15, 2006 at 10:49:40PM -0600, Randy Greif wrote: > I am trying to install Owl 2.0 now I have tried 1 & 1.1 etc. but it seems > like everything I do I cannot fdisk the hard drives. > let me start I have a Compaq DL380 PIII 700 Xeon 128mb RAM for now, two 18.2 > GB HDD on a compaq integrated smart array looks like version 1.68 As Andreas has correctly mentioned, you will likely need to build and load a driver (kernel module) for the RAID controller. The relevant kernel configuration option is CONFIG_BLK_CPQ_DA. Unfortunately, Owl is currently lacking in support for uncommon hardware - one has to build those drivers manually. We will be working on improving this. Meanwhile, you can either go for the complexity of building the driver yourself, or you can let us take care of this installation for you as I have mentioned before. But first you need to get around the kernel panic: > Now I am getting an error on boot up (nothing installed except > compaqs controller software) Were you previously able to boot up without getting this error? If so, maybe you want to revert whatever changes you applied which caused this. Then we'll deal with the RAID controller driver. > the error > "<0>Kernal Panic: Attempted to kill the idle task!" > "In idle task - not syncing" > then it just sets there. In the LILO boot selection menu, instead of just pressing Enter on the proper option, type " nosmp noapic". The resulting boot command line would look like: "ide-sec-master nosmp noapic". Does this help? > other times I got it to boot from the CD then it won't do anything from > there no fdisk etc. > I can start "settle" That's because you need the RAID controller driver - please see above for the options and let us know whether you need more specific instructions on how to build the driver or whether you'd like us to handle the installation for you. Thank you for your patience with this! -- Alexander Peslyak <solar at openwall.com> GPG key ID: B35D3598 fp: 6429 0D7E F130 C13E C929 6447 73C3 A290 B35D 3598 http://www.openwall.com - bringing security into open computing environments
This archive was generated by hypermail 2.1.3 : Thu Feb 16 2006 - 12:15:04 PST