RE: SUMMARY: Disabling Port 445 (SMB) Entirely

From: Jason Coombs (jasoncat_private)
Date: Fri Aug 30 2002 - 12:35:52 PDT

  • Next message: Matthew Murphy: "FactoSystem CMS Contains Multiple Vulnerabilities"

    Andrew,
    
    The following did not exist at the URL you provided. TransportBindName is there, but the SMBDeviceEnabled Registry value is not. Where did you find it?
    
    --
    
    SMBDeviceEnabled 
    Key: Netbt\Parameters 
    Value Type: REG_DWORD—Boolean 
    Valid Range: 0, 1 (false, true) 
    Default: 1 (true) 
    
    Description: Windows 2000 supports a new network transport known as the 
    SMB Device, which is enabled by default. This parameter can be used to 
    disable the SMB device for troubleshooting purposes. 
    
    -----Original Message-----
    From: Andrew Oman [mailto:Andrew.Omanat_private]
    Sent: Friday, August 30, 2002 7:22 AM
    To: bugtraqat_private; vuln-devat_private
    Subject: Re: SUMMARY: Disabling Port 445 (SMB) Entirely
    
    
    I hope this adds a little bit on one more method of diabling/unbinding 
    SMB:
    ( sorry if the cross-post was not appropriate )
    
    http://www.microsoft.com/ntserver/techresources/commnet/WINS/WINSwp98/WINS11-12.asp
    
    HKLM\System\Controlset001\Services\NetBT\Parameters
    
    Non-Configurable Parameters
    The following parameters are created and used internally by the NetBT 
    components. They should never be modified using the Registry Editor. They 
    are listed here for reference only.
    
    TransportBindName 
    Key: Netbt\Parameters
    Value Type: REG_SZ - Character string
    Valid Range: N/A
    Default: \Device\
    Description: This parameter is used internally during product development. 
    The default value should not be changed.
    
    
    SMBDeviceEnabled 
    Key: Netbt\Parameters 
    Value Type: REG_DWORD—Boolean 
    Valid Range: 0, 1 (false, true) 
    Default: 1 (true) 
    
    Description: Windows 2000 supports a new network transport known as the 
    SMB Device, which is enabled by default. This parameter can be used to 
    disable the SMB device for troubleshooting purposes. 
    
    
    Using the SMBDeviceEnabled key removes SMB from binding to 445.
    
    Thanks,
    
    Andrew
    



    This archive was generated by hypermail 2b30 : Fri Aug 30 2002 - 13:03:58 PDT