* Alexander Reelsen (alexat_private) wrote: > Hi folks > > I just wanted to test the current lsm patch against 2.4.6 on my SMP > workstation. However this failed miserably, I was even unable to execute > an "ls" command. > > I've read about SMP problems, but didn't think they're that hard. It might > be, that I've done some silly mistake I shouldn't have done, when doing > the kernel configuration. Is there anything that must be turned on or off? > > I've put an strace output of ls, along with the kernel error message and > the dmesg output after booting the system on > > http://tretmine.org/lsm ah, looks like sysctl. i've had a similar problem with sysctl(8). i wasn't able to track it down. this was on a UP box. the problem has disappeared, and all i've done is recompile and reboot a few times. oh, wait. it matters which lsm moule i'm using. with the capability_plug inserted it kills sysctl. i'll track this down. thanks again! -chris _______________________________________________ linux-security-module mailing list linux-security-moduleat_private http://mail.wirex.com/mailman/listinfo/linux-security-module
This archive was generated by hypermail 2b30 : Thu Jul 19 2001 - 11:11:52 PDT